RC-Monster Forums - View Single Post

brian015 · 03.16.2011, 04:19 PM

I measured the pin holes on my adapters to be between 2.95 and 3.00mm. The pins I use, however are only 2.76mm - so not a snug fit, but I've had no problems.

	(#254)
brian015 RC-Monster Aluminum Offline Posts: 768 Join Date: Jul 2009 Location: NJ	03.16.2011, 04:19 PM I measured the pin holes on my adapters to be between 2.95 and 3.00mm. The pins I use, however are only 2.76mm - so not a snug fit, but I've had no problems.