View Single Post
Old
  (#2)
DrKnow65
RC-Monster Aluminum
 
DrKnow65's Avatar
 
Offline
Posts: 998
Join Date: Oct 2007
Location: Colorado
03.29.2011, 09:34 AM

You need to pay close attention to KV vs. Max RPM.

I like my motors to push 45-60k rpm at max voltage, so 12S X 4.2v = 50.4v
50.4v \ 60,000rpm = 1190KV
50.4v \ 45,000rpm = 892KV
I also think bigger is better, but the 17xx series is only good to 45K rpm, so I'd stick with the bigger 15xx's.

So by MY standards, I would go with a 1521-1527 1.5Y Neu motor.
(I also prefer the wye winds VS the delta's because they make more power at higher RPMs versus lower).


If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...
   
Reply With Quote