RC-Monster Forums - View Single Post

Manne · 04.24.2011, 09:36 AM

I´m using a savage spur #76937, and just a mod 1.0 pinion/5mmshaft, can´t remember the brand but any would work goog with the plastic spur.

18/47 is the smallest gears you can use without grinding any material off the gearbox, I haven´t tried 18/47 with the 2200kv, that can i slightly thicker, so It might not fit/get good gearmesh.

I ordered some 49tooth spurs but I don´t think they will fit inside the chassis :), I have made a "slot" in my chassis to make the 65tooth 0.8mod to fit, so it doesn´t mather to me, just letting you know if you are makeing the swap.

	(#26)
Manne RC-Monster Carbon Fiber Offline Posts: 163 Join Date: Mar 2010	04.24.2011, 09:36 AM I´m using a savage spur #76937, and just a mod 1.0 pinion/5mmshaft, can´t remember the brand but any would work goog with the plastic spur. 18/47 is the smallest gears you can use without grinding any material off the gearbox, I haven´t tried 18/47 with the 2200kv, that can i slightly thicker, so It might not fit/get good gearmesh. I ordered some 49tooth spurs but I don´t think they will fit inside the chassis :), I have made a "slot" in my chassis to make the 65tooth 0.8mod to fit, so it doesn´t mather to me, just letting you know if you are makeing the swap.