RC-Monster Forums - View Single Post

nuz69 · 05.06.2011, 04:37 AM

I say, why not ? The amp draw doesn't depend of the motor but depends of the setup.
The motor weights 1,3kg, if its put in a monster truck of 4kg, it will do 5,3kg total weight. Geared for less than 50mph, the MMM should be totally fine, the MMM is enough to push a 5kg vehicle to more than 60mph with 6S lipo, so why not ?
More over the 2028 has a small Kv so high inductance, then the current spikes should be very low compared to other setup with smaller motors...
Just my opinion...

	(#10)
nuz69 RC-Monster Carbon Fiber Offline Posts: 471 Join Date: Feb 2010	05.06.2011, 04:37 AM I say, why not ? The amp draw doesn't depend of the motor but depends of the setup. The motor weights 1,3kg, if its put in a monster truck of 4kg, it will do 5,3kg total weight. Geared for less than 50mph, the MMM should be totally fine, the MMM is enough to push a 5kg vehicle to more than 60mph with 6S lipo, so why not ? More over the 2028 has a small Kv so high inductance, then the current spikes should be very low compared to other setup with smaller motors... Just my opinion... Inferno VE MMv3 NEU-CC 1515/1Y 4S "Flying machine" MBX5T Prospec MMv3 NEU-CC 1520/1Y 6S "Overkill Flying machine" ;) Brushless, what else ?