RC-Monster Forums - View Single Post - Castle 1410 3800kv 3s vs 1406 5700kv on 2s.

Swindez85 · 01:31 PM

What kind of amp draw do you guys think I will see gearing up to compensate for the speed difference on 2s?. Any worse than what I see with my cm36 5700 when geared for around 30-35mph? My 2s Lipo is just a 20c Duratrax and its over 2 years old and has lost some of its punch and capacity so its showing its age as well. Next pack or packs will be Gens Ace most likely.

PS - I also realize the only way to tell if the pack will withstand it is to try it and monitor temps but just kind of looking for a ballpark guess if the amps would be the same on WOT burts, even though im sure it would be greater even if just slightly.

	(#7)
Swindez85 RC-Monster Stock Offline Posts: 38 Join Date: Jun 2011 Location: North Alabama	06.02.2011, 01:30 PM What kind of amp draw do you guys think I will see gearing up to compensate for the speed difference on 2s?. Any worse than what I see with my cm36 5700 when geared for around 30-35mph? My 2s Lipo is just a 20c Duratrax and its over 2 years old and has lost some of its punch and capacity so its showing its age as well. Next pack or packs will be Gens Ace most likely. PS - I also realize the only way to tell if the pack will withstand it is to try it and monitor temps but just kind of looking for a ballpark guess if the amps would be the same on WOT burts, even though im sure it would be greater even if just slightly. Last edited by Swindez85; 06.02.2011 at 01:31 PM.