Jah, yes i tested the integy hubs and diference between them and stock is like night and day. I am never using stock again.
Erghh i do agree, to use Dejan for a wing would be a bit dificult,lol, hmmm, maybe he could just cut something out. I want to use baja roll cage at the end anyway.
Hi Aero :) Well integy hubs did cost, was like 95$ + tax.
Must say these do solve a lot of small "problems", like gap between the hubs, better turning. Now it is all nice and tight.
Alza is a great shop and he is a great guy, i know :)
That is why i buy there everything i need. Waiting for XL arms for FLM dogbones.
On FLM site they say both kits are Extended.... dont know what is the diference.
Alza dogbones are stainless steel. I ordered FLM dogbones as price is good.
Arms will do alza as this way i get them a lot cheaper..i also dont pay tax this way.
Small update: Foty had head on chrash.
-Broken front bulk
-Twisted braces, one in bulk and lower one that holds skids
-Broken Diff output pins
-Broken gears
-Cracked diff cup
-Diff screw broken
here few pic.
Not finished HPI product:
All this is now fixed and hes 5b is rtr again. We also changed oil in hes diffs.
50W front 30W back. And foty has 23/44T gearing, dont know why i thought he got 20/44T.
Because of motor pinion screw always going lose, i mounted hes motor pinion with M4 screw M4x6mm for 23T m. pinion. Pinion is turned other way around and secured.
I only turned my sevo for 90 degrees and cutted the body, now it sits nicer.
I am having problems with slipper screw. It is getting lose and my 44T diataches from slipper kit. Will try to use 2 nuts and red locktite. Hope this will hold.