RC-Monster Forums - View Single Post

Knez · 09.27.2011, 05:46 PM

Here a new BMX track...had a taste today for 30min than lower part from shocks broke...

Video : http://www.youtube.com/watch?v=nAOC-rJNvFk

Also removed all shims from slipper kit and used M5 slim nut so it goes to the shaft "on the part that is got no thread for screw" and pushes 44T properly on the slipper kit. Tighten it with stock M4 nut and used another "slim" nut over the stock. A lots of lock tight, 24hr healed.

	(#11)
Knez RC-Monster Carbon Fiber Offline Posts: 142 Join Date: Mar 2010 Location: Slovenia	09.27.2011, 05:46 PM Here a new BMX track...had a taste today for 30min than lower part from shocks broke... Video : http://www.youtube.com/watch?v=nAOC-rJNvFk Also removed all shims from slipper kit and used M5 slim nut so it goes to the shaft "on the part that is got no thread for screw" and pushes 44T properly on the slipper kit. Tighten it with stock M4 nut and used another "slim" nut over the stock. A lots of lock tight, 24hr healed. Flux 5B CC 1520 1/16 Rally My Youtube Russian:Life and Trust is Lost Only Once!