RC-Monster Forums - View Single Post

_paralyzed_ · 10.31.2011, 07:08 PM

I've replaced many antennas on many receivers (never spektrum) and it always worked. I see no reason you can't just solder it back on.

Do you have a separate bind plug along with the 4aa holder? I know earlier spekky units had a bind plug that jumpered two of the three rx pins together. So, if you don't have a separate bind plug I would say that spekky probably did wire the 4aa holder to also do the job of a bind plug.

I'll google bind plug wiring and report back if I find anything...

	(#2)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	10.31.2011, 07:08 PM I've replaced many antennas on many receivers (never spektrum) and it always worked. I see no reason you can't just solder it back on. Do you have a separate bind plug along with the 4aa holder? I know earlier spekky units had a bind plug that jumpered two of the three rx pins together. So, if you don't have a separate bind plug I would say that spekky probably did wire the 4aa holder to also do the job of a bind plug. I'll google bind plug wiring and report back if I find anything... _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.