RC-Monster Forums - View Single Post - Y- vs. D-wound! What's the story?

snellemin · 01.02.2012, 03:24 PM

Bernie has his opinion, but so do I.

I've been running D wind motors for a while now and have yet to blow up a Castle esc or Tekin. Just yesterday I ran a D wind motor in the RCM CRT.5 with a Castle esc with zero issues. I also ran the Delta motor with 5 degrees of timing instead of the usual 0 degrees of timing, as I was swapping motors during the day.

If Torque is what you seek, then get the Delta.
Quick spool up is with 2 pole motors only.

	(#4)
snellemin 2 KiloWatt RACER Offline Posts: 2,496 Join Date: May 2007 Location: Houston	01.02.2012, 03:24 PM Bernie has his opinion, but so do I. I've been running D wind motors for a while now and have yet to blow up a Castle esc or Tekin. Just yesterday I ran a D wind motor in the RCM CRT.5 with a Castle esc with zero issues. I also ran the Delta motor with 5 degrees of timing instead of the usual 0 degrees of timing, as I was swapping motors during the day. If Torque is what you seek, then get the Delta. Quick spool up is with 2 pole motors only. 6 KiloWatt A123 Racer GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW