RC-Monster Forums - View Single Post - 1717 Possible to snap motor shaft from too large pinion?

Arct1k · 01.14.2012, 07:15 PM

5mm shafts rarely break.

Side loads on the shaft normally cause bearing failure.

High RPM's will cause magnets to crack..

	(#2)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	01.14.2012, 07:15 PM 5mm shafts rarely break. Side loads on the shaft normally cause bearing failure. High RPM's will cause magnets to crack..