RC-Monster Forums - View Single Post - Using a different radio system with the Traxxas XO-1

suicideneil · 05:06 PM

I don't quite understand- have you updated your castlelink software on your PC before trying to connect the esc to it via the castlelink device?

EDIT:

Ah, I see the issue now- the firmware on the esc isn't recognised by the current ( latest ) version of the castlelink program, so you can't alter any settings on the esc via castlelink, only via castlelink live/ traxxas link with with an iPlod.

I suppose then the next best option is to adjust the settings via iPlod until you are happy, then just recalibrate the esc to your new radio ( set throttle, brake & reverse end points )- or is that what you are unable to do?

	(#2)
suicideneil Old Skool Offline Posts: 7,494 Join Date: Feb 2007 Location: Devon, England	02.10.2012, 05:01 PM I don't quite understand- have you updated your castlelink software on your PC before trying to connect the esc to it via the castlelink device? EDIT: Ah, I see the issue now- the firmware on the esc isn't recognised by the current ( latest ) version of the castlelink program, so you can't alter any settings on the esc via castlelink, only via castlelink live/ traxxas link with with an iPlod. I suppose then the next best option is to adjust the settings via iPlod until you are happy, then just recalibrate the esc to your new radio ( set throttle, brake & reverse end points )- or is that what you are unable to do? My Gmaxx thread EMAXX FAQ TUTORIALS USEFUL LINKS MY YOUTUBE Last edited by suicideneil; 02.10.2012 at 05:06 PM.