RC-Monster Forums - View Single Post

RC-Monster Mike · 03.31.2006, 09:14 AM

The wires can be soldered directly or plugged into the receptors on the motor. Or, use plugs with a slioght touch or solder to keep them from coming unplugged.
The standard "19" motors(non hi-amp) can be configured differently, so the 7 turn motor(which you have), can be re soldered to perform as a 12 turn motor. Essentially, they are two motors in one. :)

	(#2)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	03.31.2006, 09:14 AM The wires can be soldered directly or plugged into the receptors on the motor. Or, use plugs with a slioght touch or solder to keep them from coming unplugged. The standard "19" motors(non hi-amp) can be configured differently, so the 7 turn motor(which you have), can be re soldered to perform as a 12 turn motor. Essentially, they are two motors in one. :)