RC-Monster Forums - View Single Post - 1520 enough motor for 1/5-1/6 scale cen nemesis?

JERRY2KONE · 05:50 PM

Go for the gusto man. Use the motor that will give you a little wiggle room regarding heat and power band like the Neu 1527, but consider that the can is a bit longer as well. Also use the CC-XL2 so you will have plenty of power control with the least amount of heat issues. I believe that setup will give you the best results, and the least amount of problematic issues. Good luck with your project and post up some pictures and specs as you go.

	(#6)
JERRY2KONE JERRY2KONE SUPERMAXX Offline Posts: 3,452 Join Date: Sep 2006 Location: HAYMARKET VIRGINIA	1527 - 03.10.2012, 03:40 PM Go for the gusto man. Use the motor that will give you a little wiggle room regarding heat and power band like the Neu 1527, but consider that the can is a bit longer as well. Also use the CC-XL2 so you will have plenty of power control with the least amount of heat issues. I believe that setup will give you the best results, and the least amount of problematic issues. Good luck with your project and post up some pictures and specs as you go. SUPERMAXX YOUR LIFE. Last edited by JERRY2KONE; 03.10.2012 at 05:50 PM. Reason: ADDING INFO