RC-Monster Forums - View Single Post

_paralyzed_ · 01.13.2013, 05:12 PM

The center plate of the center diff mount is upside down, the flat part goes to the bottom.

I don't understand what's going on with that bottom plate with all the holes in it. It almost looks like you mixed and matched a normal chassis with a low center of gravity chassis.

BTW that is a 3905 chassis.

The best bet is really to mock up a driveshaft and measure it.

	(#12)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	01.13.2013, 05:12 PM The center plate of the center diff mount is upside down, the flat part goes to the bottom. I don't understand what's going on with that bottom plate with all the holes in it. It almost looks like you mixed and matched a normal chassis with a low center of gravity chassis. BTW that is a 3905 chassis. The best bet is really to mock up a driveshaft and measure it. _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.