RC-Monster Forums - View Single Post - Looking for a 95-96mm dogbone?

Thirdgen89GTA · 01.26.2013, 04:06 PM

NM. Score. Turns out an old X1 Buggy front Driveshaft works just fine! Its even a CVA to boot!

This leaves me with 88mm from the front of the center diff bulkhead to the bellcrank. Plenty of room for a 1717!!!

SCORE! Now i can drill/countersink the holes finish it up so its a complete electric conversion roller just ready for the electronics.

Now the CVA I have is a little used, its got quite a bit of play so I'll need to order another one but that it fits is most excellent!
http://www.nitrohouse.com/Universal-...-2_p_8077.html

	(#1)
Thirdgen89GTA You can sleep in a car, but you can't race a house Offline Posts: 311 Join Date: Mar 2007 Location: Buffalo Grove, IL	01.26.2013, 04:06 PM NM. Score. Turns out an old X1 Buggy front Driveshaft works just fine! Its even a CVA to boot! This leaves me with 88mm from the front of the center diff bulkhead to the bellcrank. Plenty of room for a 1717!!! SCORE! Now i can drill/countersink the holes finish it up so its a complete electric conversion roller just ready for the electronics. Now the CVA I have is a little used, its got quite a bit of play so I'll need to order another one but that it fits is most excellent! http://www.nitrohouse.com/Universal-...-2_p_8077.html 1989 Pontiac TransAm GTA, 5.7L LT1/M6 400rwhp+ Jammin X1 CRT Pro, MMM/1717, 6S Hyper One Seven 1/7th scale GT car, MMM/1717, 6S Hyper 10TT, MMP/1410, 3S TL Mini 8ight, stock, 2S