RC-Monster Forums - View Single Post

ruudxd · 06:50 AM

As far as I can see in the exploded views, both the MT4 and the ST1 came stoch with 8mm stub axles, like almost every 1:8th scale car I know of.
In the pictures I see a standard sub axle with some flat spots ground on them, done by the owner.
The MT4 comes with these axles, not in stock, but you should get the idea:

http://www.dollarhobbyz.com/collecti...shaft-assembly

The FG square hubs are like these, the part number depends on the width of the hub:

https://rc-car-online.de/en/products...5mm-steel.html

The other pieces look the be just a peace of brass pipe, with a ID of 8mm, and a bolt that fits in the axle, you should be able to get that in your local hardware store, or at a machine shop?

I think I am misunderstanding you, my English is not that good, sorry.

	(#6)
ruudxd RC-Monster Carbon Fiber Offline Posts: 235 Join Date: Nov 2012 Location: The Netherlands.	02.15.2017, 06:46 AM As far as I can see in the exploded views, both the MT4 and the ST1 came stoch with 8mm stub axles, like almost every 1:8th scale car I know of. In the pictures I see a standard sub axle with some flat spots ground on them, done by the owner. The MT4 comes with these axles, not in stock, but you should get the idea: http://www.dollarhobbyz.com/collecti...shaft-assembly The FG square hubs are like these, the part number depends on the width of the hub: https://rc-car-online.de/en/products...5mm-steel.html The other pieces look the be just a peace of brass pipe, with a ID of 8mm, and a bolt that fits in the axle, you should be able to get that in your local hardware store, or at a machine shop? I think I am misunderstanding you, my English is not that good, sorry. Last edited by ruudxd; 02.15.2017 at 06:50 AM.