RC-Monster Forums - View Single Post

HotnCold · 04.15.2006, 04:53 AM

If there is no binding or rubbing - then check to make sure that your servo horn is centered so that it goes left and right equally. If its slow - are you running a ubec or a battery. If you are looking to replace the servo - JR Hitec - either one you cant go wrong - you want some torque and speed - go for around 180oz tq and .15 or better transit time at 6.0v. Hope this helps...

	(#2)
HotnCold RC-Monster Admin Offline Posts: 1,065 Join Date: Dec 2004 Location: RC-Monster Store....Where else?	04.15.2006, 04:53 AM If there is no binding or rubbing - then check to make sure that your servo horn is centered so that it goes left and right equally. If its slow - are you running a ubec or a battery. If you are looking to replace the servo - JR Hitec - either one you cant go wrong - you want some torque and speed - go for around 180oz tq and .15 or better transit time at 6.0v. Hope this helps... Hows that "Hope and Change" working out for Ya???