RC-Monster Forums - View Single Post - 1920 5turn+2 or 3s 8000's will it be faster than 4.5?

Gustav · 06:03 PM

I thought Mike has some 4mm pinions,if not then get someone with a lathe (such as Mike)to run a 4mm drill through some 1/8 pinions,i do that to run 48p pinions on my 1920,there's still plenty of meat left on them since you're only increasing the diameter by less than 1 mm.

	(#9)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	05.02.2006, 05:38 PM I thought Mike has some 4mm pinions,if not then get someone with a lathe (such as Mike)to run a 4mm drill through some 1/8 pinions,i do that to run 48p pinions on my 1920,there's still plenty of meat left on them since you're only increasing the diameter by less than 1 mm. Last edited by Gustav; 05.02.2006 at 06:03 PM.