RC-Monster Forums - View Single Post - Want a different setup for brushless in an rc 18T

squeeforever · 05.06.2006, 11:07 AM

Well as Johnny said, i would go with the Quark esc, but as for motors, im not sure of the length you can use. Check and see. If a 1010, I would use a 1010/30 on 3s lipo. If a 1015, I would use a 1015/23 (a 1020 has the same kv as the 1010/30 but has more torque so gear higher with a lower kv), with 3s lipo. If a 1020, I would use a 1020/18, again because of higher torque.

	(#3)
squeeforever RC-Monster Mod Offline Posts: 6,254 Join Date: May 2005 Location: Baton Rouge	05.06.2006, 11:07 AM Well as Johnny said, i would go with the Quark esc, but as for motors, im not sure of the length you can use. Check and see. If a 1010, I would use a 1010/30 on 3s lipo. If a 1015, I would use a 1015/23 (a 1020 has the same kv as the 1010/30 but has more torque so gear higher with a lower kv), with 3s lipo. If a 1020, I would use a 1020/18, again because of higher torque.