RC-Monster Forums - View Single Post - Easiest/quickest way to build an e-REVO?

squeeforever · 11:29 PM

The RPM arms will flex and allow them to pop out and then will get bent from banging around. I actually think mine flexed enough in a hard turn for it to pop out. Not really sure when though so I can't be for sure. You should be ok in the rear though. The fronts gonna give you the most problems.

	(#12)
squeeforever RC-Monster Mod Offline Posts: 6,254 Join Date: May 2005 Location: Baton Rouge	07.24.2006, 11:27 PM The RPM arms will flex and allow them to pop out and then will get bent from banging around. I actually think mine flexed enough in a hard turn for it to pop out. Not really sure when though so I can't be for sure. You should be ok in the rear though. The fronts gonna give you the most problems. Last edited by squeeforever; 07.24.2006 at 11:29 PM.