RC-Monster Forums - View Single Post - Brushless Thunder Tiger ST-1

cart213 · 10.02.2006, 01:38 PM

Ok. I did a little bit of testing on asphalt today. I set the quark lvc at 3.0V, which is the highest setting allowed. Then I got out my gps and did some acceleration and speed testing. The top speed did not drop any, still 39mph, and the acceleration seemed to be as strong as ever. I ran the truck for about 15 minutes but did not use up the entire pack. There was only one time when the truck stuttered before accelerating, which I guess was the lvc kicking in. Overall, it looks like the packs are able to maintain greater than 3.0V per cell during heavy use, at least on my truck.

	(#67)
cart213 RC-Monster Carbon Fiber Offline Posts: 484 Join Date: Dec 2005	10.02.2006, 01:38 PM Ok. I did a little bit of testing on asphalt today. I set the quark lvc at 3.0V, which is the highest setting allowed. Then I got out my gps and did some acceleration and speed testing. The top speed did not drop any, still 39mph, and the acceleration seemed to be as strong as ever. I ran the truck for about 15 minutes but did not use up the entire pack. There was only one time when the truck stuttered before accelerating, which I guess was the lvc kicking in. Overall, it looks like the packs are able to maintain greater than 3.0V per cell during heavy use, at least on my truck.