RC-Monster Forums - View Single Post

RC-Monster Mike · 05.15.2005, 07:34 PM

Thewanderer motors are made by Feigao to BK's specs. The windings are the same from motor to motor, and as candyman said, they simply measure differently (Bk states rpm figures under load, while Feiogao states them unloaded). So, the wanderer 7xl would be the same motor as the Feigao 7xl, but with some upgraded bearings and a different color basically. The 9920 could handle the 8xl on 20 cells. The 30/36 cell controller also have a 42000 rpm limit, which will change the motor selection(9xl perhaps). The micro series controller also has a few more programming options via cable than the warrior series, but is a bit more expensive. 20 gp2200 cells will fit quite nicely in the g-maxx chassis as well, and will weigh less than the 16 cells you have now.

	(#43)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	05.15.2005, 07:34 PM Thewanderer motors are made by Feigao to BK's specs. The windings are the same from motor to motor, and as candyman said, they simply measure differently (Bk states rpm figures under load, while Feiogao states them unloaded). So, the wanderer 7xl would be the same motor as the Feigao 7xl, but with some upgraded bearings and a different color basically. The 9920 could handle the 8xl on 20 cells. The 30/36 cell controller also have a 42000 rpm limit, which will change the motor selection(9xl perhaps). The micro series controller also has a few more programming options via cable than the warrior series, but is a bit more expensive. 20 gp2200 cells will fit quite nicely in the g-maxx chassis as well, and will weigh less than the 16 cells you have now.