RC-Monster Forums - View Single Post

Finnster · 10.23.2006, 11:32 AM

I run a reversed maxx tranny on my ERevo and have a gear cover as not to have battery wires get sucked into the gears. I used a stock emaxx one, just trimmed the bottom a bit and used ~3mm of fuel tubing as spacers to clear the spur and pinion. Had one experience of batt wires into the gears on the Emaxx I care not repeat. :)

	(#14)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	10.23.2006, 11:32 AM I run a reversed maxx tranny on my ERevo and have a gear cover as not to have battery wires get sucked into the gears. I used a stock emaxx one, just trimmed the bottom a bit and used ~3mm of fuel tubing as spacers to clear the spur and pinion. Had one experience of batt wires into the gears on the Emaxx I care not repeat. :)