RC-Monster Forums - View Single Post

Serum · 05.28.2005, 10:09 AM

Yes, these diffs should fit them perfect.

The savage diff is too big though, (ringgear issue) but these 1/8th diffs should fit.

The shafts you can use are the MIP's /UE's or any other brand cvd/drivebone. you can't use the stock driveshafts though.

The hingepins that have got another size, are included with the bulkless conversion. (make sure to get the 1/8th though, there are two different sets..) I guess you allready found that out..

The UE diffs won't fit them though. (need a little tweaking to make them fit..) The drivecups are simple too big for the holes..

	(#2)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	05.28.2005, 10:09 AM Yes, these diffs should fit them perfect. The savage diff is too big though, (ringgear issue) but these 1/8th diffs should fit. The shafts you can use are the MIP's /UE's or any other brand cvd/drivebone. you can't use the stock driveshafts though. The hingepins that have got another size, are included with the bulkless conversion. (make sure to get the 1/8th though, there are two different sets..) I guess you allready found that out.. The UE diffs won't fit them though. (need a little tweaking to make them fit..) The drivecups are simple too big for the holes..