Quote:
|
Originally Posted by neweuser
can you run 3s on the 8000?
|
Sure, and without any problems.
You maybe will have some, if you go over 3S.
With a 3S pack you will push the mamba over 100.000 rpm.
With a 4S pack you will push it over 134.000 rpm.
I say: the controller is all right if you go for an external BEC ....
I think the motor is over its bearings capabilities ...with 4S but not with 3S.
So yes, you can use a 3S without problem with the 8k.
Just keep the temperature in mind, while you are trying different pinions.
Ciao,
Daniele