RC-Monster Forums - View Single Post

JEFFRO503 · 01.04.2007, 12:06 AM

hey guys , i have one more question for the night. when i measured out the mounting holes on the shaft side of my novak 5800 (540 size) , it looks as though the holes are about 1" even , or possibly 25.2mm -25.4mm apart....hard getting an exact measurement with my digital caliper. On the 550 sized motors like the Lehner 1940's , due you happen to know the distance between the holes on these motor's?

I'm going to attempt to make a brace just like my Mugen MBX one i have , re-adjust all the mounting holes for the chassis , and top plate bolts and also make it so it can accept a larger 550 size Motor.

Crap as far as that all goes........do you guys know anyone who makes these braces? does Mike from here at RC monster do that stuff?

Jeff

	(#11)
JEFFRO503 RC-Monster Stock Offline Posts: 33 Join Date: Jan 2007	01.04.2007, 12:06 AM hey guys , i have one more question for the night. when i measured out the mounting holes on the shaft side of my novak 5800 (540 size) , it looks as though the holes are about 1" even , or possibly 25.2mm -25.4mm apart....hard getting an exact measurement with my digital caliper. On the 550 sized motors like the Lehner 1940's , due you happen to know the distance between the holes on these motor's? I'm going to attempt to make a brace just like my Mugen MBX one i have , re-adjust all the mounting holes for the chassis , and top plate bolts and also make it so it can accept a larger 550 size Motor. Crap as far as that all goes........do you guys know anyone who makes these braces? does Mike from here at RC monster do that stuff? Jeff