Quote:
Originally posted by RC-Monster Mike
The 18/120 controller works the same way. Treat the two leads that are soldered together as one lead. The bigger controllers like this have two boards wired in parallel(hence the double wires). I am 100% sure on this (I run the 18/120 in one of my emaxxes).
I use deans for the same reasons you stated-they don't allow the simple mistake of miswiring to be made. they also can handle quite a bit of current.
|
Excellent.
I made a drawing addressing my concern. But I believe you just alleviated it (my concern, that is) :D
See if this makes sense and why I wanted cold hard facts from BK (hopefully I don't foobar the attachment process).
Depending on the internal wiring of the 18120 you can really mess up stuff if you get it wrong. And I realize the leads going to the motor have three wires...just wanted to keep it simple.