RC-Monster Forums - View Single Post

gixxer · 01.14.2007, 12:33 AM

I am running a kyosho 44t spur. The 4000mah packs didn't get hot but the tabs were getting hot enough to melt the shrink on the end, so I dont think they were able to handle the load or maybe a bad solder(not sure wasn't going to open it up because austin said he would exchange it towards a bigger pack).
as for weight with the 4000's the motor side was actually heavier. the brakes are fine with just the motor, that is the same way I ran it on my hyper 8.

	(#12)
gixxer RC-Monster Titanium Offline Posts: 1,150 Join Date: Jan 2005 Location: wolcott ct	01.14.2007, 12:33 AM I am running a kyosho 44t spur. The 4000mah packs didn't get hot but the tabs were getting hot enough to melt the shrink on the end, so I dont think they were able to handle the load or maybe a bad solder(not sure wasn't going to open it up because austin said he would exchange it towards a bigger pack). as for weight with the 4000's the motor side was actually heavier. the brakes are fine with just the motor, that is the same way I ran it on my hyper 8.