RC-Monster Forums - View Single Post

MetalMan · 02.11.2007, 10:42 PM

Right now I'm running 16.5v 4600mah and a Feigao 540C 9L in my X-Terminator. My thoughts are that 5s/6s 10000mah is going to be too heavy at greater than 1000g for a 5s setup (my setup is already heavier than the nitro with a L motor and 700g of batteries).

I think a Feigao 540C 8XL would be a better motor, as well as 4s 8000mah Lipo. The X-Terminator is a pretty narrow buggy, and I had a difficult time fitting the batteries onto the chassis. Right now, the batts are mounted mainly to the mud guards.

	(#2)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	02.11.2007, 10:42 PM Right now I'm running 16.5v 4600mah and a Feigao 540C 9L in my X-Terminator. My thoughts are that 5s/6s 10000mah is going to be too heavy at greater than 1000g for a 5s setup (my setup is already heavier than the nitro with a L motor and 700g of batteries). I think a Feigao 540C 8XL would be a better motor, as well as 4s 8000mah Lipo. The X-Terminator is a pretty narrow buggy, and I had a difficult time fitting the batteries onto the chassis. Right now, the batts are mounted mainly to the mud guards. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz