[sjcrss]

I used to run a 1895 Micro controller, along with a 1920/8 Bl motor.....the motor should be ok, and so should the controller...you just need to watch your gearing....say around 13t pionion or 14 t pinion with a 66t spur....if the batts are NIMH...then run 14-16 cells and you should be fine....also a fan over the controller can't hurt either...one more thing...if you goto "how to program 9920 controller" on the forums...the instructions are the same for the other controllers as well....also if you are going to use over 12 cells, you either need to pull the black bec plug off from under the shrinkwrap on bottom of controller or just remove the red wire from the servo lead...also a UBEC will help to...