RC-Monster Forums - View Single Post

What's_nitro? · **BK+LMT Glitching/Cogging ??? -** 04.06.2007, 07:45 PM

Hi everyone, I just bought a new BL setup for my Rustler:

BK Warrior 12020
LMT Basic XL 5000
Tanic 11.1v 5000mAh LiPo

Yes I realize this is a hot setup, probably too hot but we will see. Anyways that isn't the issue. While bench testing I noticed around 2/3 and up through 3/4 throttle the motor glitches/coggs like mad. It actually stops and revs up again about every 1/2 second. There is absolutely no way I can drive the vehicle like this. To my knowledge the BK doesn't have adjustable timing; and the LMT is a 2 pole motor so there should be no problem there.

Any thoughts and/or suggestions would be appreciated.

Thanks, Steve.

	(#1)
What's_nitro? Soldermaster Extraordinaire Offline Posts: 4,529 Join Date: Apr 2007 Location: Plymouth, MA, USA	BK+LMT Glitching/Cogging ??? - 04.06.2007, 07:45 PM Hi everyone, I just bought a new BL setup for my Rustler: BK Warrior 12020 LMT Basic XL 5000 Tanic 11.1v 5000mAh LiPo Yes I realize this is a hot setup, probably too hot but we will see. Anyways that isn't the issue. While bench testing I noticed around 2/3 and up through 3/4 throttle the motor glitches/coggs like mad. It actually stops and revs up again about every 1/2 second. There is absolutely no way I can drive the vehicle like this. To my knowledge the BK doesn't have adjustable timing; and the LMT is a 2 pole motor so there should be no problem there. Any thoughts and/or suggestions would be appreciated. Thanks, Steve.