MP-6 speed control

[DLS II]

Hi, I will soon get my MP-6 buggy back from Monster Mike. He installed a Rimfire 42-60-600 outrunner in place of the center diff. I will be running it 5 or 6s A123. The KV of the motor is 600,max constant current is 40a and max surge current is 70a. There's no telling what the spikes will be. I have on hand a Schulze 18-61K and a MM. The Schulze will handle the voltage ( 18 NIMH) but it's only good for 61a continuous and 81 surge. The MM is good for 100a and I believe 5s A123, but not 6s. On the other hand if need be I will get a MMM. Any help would be great! Thanks, Don

[gimpygolden]

I run an MM on 5s Lipo 18.5 nominal 20.5-21v off the charger.
What is A123 6s voltage?

[DLS II]

19.8 nominal. Don

[BL_RV0]

I'd run the schulze.

[DLS II]

That's what I was thinking-although if it goes up in smoke I'll get a picture of it for Serum! Don

[BL_RV0]

[DLS II]

IIRC he has a collection of Schulze " burnt offerings"!!! Don

[BL_RV0]

[DLS II]

Yup!