DX3.0 Lipo Mod - RC-Monster Forums

Arct1k · **DX3.0 Lipo Mod -** 12.07.2008, 12:25 PM

Takes 5 mins and costs under $20...

Rgds

Arct1k · 12.07.2008, 12:27 PM

ssspconcepts · 12.07.2008, 12:32 PM

Thanks for sharing the details of this mod. I am burned out on changing and charging AA batteries.

ssspconcepts · 12.14.2008, 03:11 PM

BTW...what Lipo did you use? Got a link?

Thanks.

Arct1k · 12.14.2008, 05:19 PM

http://cgi.ebay.com/Boom-Racing-Li-p...em120347981580

But scored it for $20

ssspconcepts · 12.14.2008, 09:02 PM

Quote:

Originally Posted by Arct1k

http://cgi.ebay.com/Boom-Racing-Li-p...em120347981580

But scored it for $20

That's great. I hate to keep asking questions but I am getting ready to buy one and I wanted to know what kind of balancer tabs it has (I have hyperion and flight/thunder power for my charger).

lincpimp · 12.14.2008, 10:15 PM

Quote:

Originally Posted by ssspconcepts

That's great. I hate to keep asking questions but I am getting ready to buy one and I wanted to know what kind of balancer tabs it has (I have hyperion and flight/thunder power for my charger).

Looks to have an align style tap. Those are quite popular for the chinese lipos. They are the next best tap, after the hyperion, IMO.

Arct1k · 12.14.2008, 10:16 PM

IIRC Align/E-Flite compatible same as my protek packs..

ssspconcepts · 12.14.2008, 10:20 PM

Thanks guys.

lincpimp · 12.14.2008, 10:23 PM

There is an adapter that will plug into a 6s tp lead and allow 2-6s align taps to plug in. I think align make it...

ssspconcepts · 12.15.2008, 02:30 AM

Quote:

Originally Posted by lincpimp

There is an adapter that will plug into a 6s tp lead and allow 2-6s align taps to plug in. I think align make it...

Linc...do you have a web link for that item? Thanks.

ssspconcepts · 12.22.2008, 07:28 PM

Finished mine this weekend...Yay!

From DM-1 Spec

shizzon · 12.15.2008, 12:30 AM

Could you post a link to where you got that lipo pack?

kulangflow · 05.07.2009, 03:49 PM

Sorry to bring up an old thread, but I have a quick question for you guys who have done this mod:

Do you unplug your lipo every time you're done using your controller, or do they hold up well enough that you can just check it once a week or so?

I know the safest route is to unplug it when not in use, but I'm wondering if I could get away with a bit of risk since the "off" current draw is so low and I use it fairly often.

Thoughts?

BTW: Thanks for the how-to, Arct1ck!

BrianG · 05.07.2009, 04:03 PM

When the switch is off, there is no current flow/drain, so it should be fine. The only other mod I personally would do would be to cut in a balance tap so you don't have to open it every time.

Sometimes I wish the DX3R/S would have stayed with the 8AA cell theme. Using a lipo for ~6v is too much work.