Updates of the family

[jnev]

Thought I'd post up some updated pictures of all of my rc's. At the moment, only one is working but another should be working as well within the next couple weeks or so.

The Xterminator is the one that is always working. It was also my very first conversion. The system I am running in it is:
- MM ESC
- Feigao 9xl motor (1853KV)
- UBEC
- TrueRC 4s2p 8k lipo pack
- RC-Monster motor mount
- custom battery tray
- Spektrum receiver
- Hitec HS-645MG
The ESC and motor both have fans as well, which amazingly keeps all the temps below 140*F with normal driving. I can get the temps up if I want, but generally, I am very pleased with the performance of it. Its geared 18/46 as well. No upgrades on at the moment either. And so far absolutely nothing major has broken except for a bent dog bone and wing.



My RC10GT is the one that should be ready to drive in next couple weeks. All I need is an MM ESC. I am going to the hobby shop to buy front/rear shocks, and I already purchased a pinion and bullet connectors from Mike. I also already have a UBEC that I purchased from Mike a while ago on accident. I am planning to use:
- MM ESC
- Feigao 7L motor (3511KV)
- UBEC
- Max Amps 2s5p 5500mAH saddle pack
- RC-Monster motor mount
- Spektrum receiver
- Hitec HS-5645MG
Unfortunately, it is the only battery that will fit. It should still give good performance though. It is going to be geared 18/62 at the moment. The upgrades are RPM blue front bumper, RPM blue front/rear a-arms, RPM blue bulkhead, RPM body posts, RRP diff gear, RRP idler gear, Pro-Line Moab tires, and the AE factory team chassis. I'm sure there is more, but that is all I can think of at the moment.