F/S: trinity now, rcm heatsink, tires, and more.

[rootar]

Im cleaning off my shelves in my room, not looking to make any money here but just get the stuff out of my way and to someone who will or can use it.

PM me for prices, everything is CHEAP

----Trinity now, ran 14-15 times on 2s (till crapamps pack died), ran twice on 3s, comes just like you see it, with my 3.2mm chassis i made for it and gorrilla strap to accomidate different packs, i have a spare spur gear for it and i put a new one on it as the last one had got a little chewed up. you can tell from the body and the under chassis pics how much this truck has used. I did loose an e-clip off a rear suspension pin and i could find one in my box so i used a mico-t bodyclip it works fine but i dont want there to be any surprises. here is a link to where i made the chassis http://www.rc-monster.com/forum/show...hlight=trinity

----rcm xl black heat sink/clamp, has been dremeled to clear screws on the previous setup i used it on.

----Proline Moab 2.2 tires on associated style wheels, two of the wheels are ruined but the tire were only ran once (stripped the wheels first run) you could prolly get these on the wheels easily as i did a bad job gluing them.

----Blade CX2 heli , has two lipos (10 cycles on each), spare upper and lower rotors, spare landing legs, has charger, DSM radio, and training gear set also, the body does have a crack in it but not major, it will comes setup out of the box hovering straight and easy and ill even include a heli mag with setup tips if you ever have to replace the baldes or get it out of balance. and need to adjust it (i have two other helis, and this has just been collecting dust since it was my trainer.) comes in original box with all papers and manuals will post pics if someone is interested.

thanks guys id like this stuff gone quick as the shelves they were one are now occupied and this stuff is in my floor