Broke my carb in big crash

Hi I broke my .26 Sportwerks carb in a big crash today and I bent my New Era chassis also.
I would like to know if I can use another company carb?

Sportwerks is the same as Mach , also same design as XTM big blocks. Been swapping carbs between these same 3 motors all Spring. SH bigblocks share backplates, but I honestly don't know about the carbs.

Thank you for the info

In the long run I found out that I cracked my engine now I am looking for a new BIG BLOCK.
Any one with any info on BIG BLOCK??

[RC-Monster Mike]

I have a new Infinity .27 pull start motor I have been dying to test. It is NIB waiting for me to test it to determine if they run well enough for me to list on the site and sell.
I can get Sirio, Picco, Ofna motors for you, daniel. I have an Ofna .21 Hyper 8 port .21 pullstart in stock (though you may be looking for the Bigger big blocks!).
Sounds like you had a he@# of a crash! Any carb that fits the block should work, although I guess tht is a moot point, now, huh!

[RC-Monster Mike]

A buddy of mine swears by the .26 picco, but I haven't run one myself (I will say that his do RIP).

Originally posted by RC-Monster Mike
A buddy of mine swears by the .26 picco, but I haven't run one myself (I will say that his do RIP).

Hi Mike I was told that the .26 picco is now only for the stock replacement T-Maxx they Discontinued the SG crank:C:
Daniel Murray

Originally posted by RC-Monster Mike
I have a new Infinity .27 pull start motor I have been dying to test. It is NIB waiting for me to test it to determine if they run well enough for me to list on the site and sell.
I can get Sirio, Picco, Ofna motors for you, daniel. I have an Ofna .21 Hyper 8 port .21 pullstart in stock (though you may be looking for the Bigger big blocks!).
Sounds like you had a he@# of a crash! Any carb that fits the block should work, although I guess tht is a moot point, now, huh!

Mike I am Looking for 2.6 HP or more than 36,000 rpm Motor.I had so much lowend power with the Sportwerks that at half throttle I could back flip my TNX. So I hope with a higher RPM engine I could also get more top end.
MY Sportwerks made 2.75hp at 33,000 RPM.
Any help would be alsome!!
Daniel Murray

Mike I can not fine Nitro engines in the store on line?
Daniel Murray

eb modded xrp that engine RIPS comes with a price though.

[RC-Monster Mike]

I haven't got the nitro engines listed yet, Daniel. I am re organizing the site and then I will list MANY new items in the store. The .27 says 40000 rpms in the specs, but not sure of the horsepower. I am sure it has enough HP to pull your truck around quite easily.

Mike do you have any Pricing on you engines?
Daniel Murray

[RC-Monster Mike]

$135 for the .27 pullstart and about the same for the Ofna Hyper.21 8 port(al;so a pullstart). I will look into some of the other engines for you as well.

Mike

Originally posted by RC-Monster Mike
$135 for the .27 pullstart and about the same for the Ofna Hyper.21 8 port(al;so a pullstart). I will look into some of the other engines for you as well.

Mike

Thank you Mike I will look forward into see other engines and pricing
Thank you,
Daniel Murray

[squeeforever]

mike, what would be a really powerful engine for a revo? something at a good price. i would have to be a pullstart and would have to be a good engine to race with. im looking for something at a good price and something that will outperform the o.s. .18tz