Please make a small can (2650 size) 2000-2200 kv motor - RC-Monster Forums

Castle there are a lot of serious racers that would love a small can low kv motor 2200 and lower.
They will sell

glassdoctor · 02.22.2009, 10:59 PM

Quote:

Originally Posted by badassrevo

Castle there are a lot of serious racers that would love a small can low kv motor 2200 and lower.
They will sell

+1

make one @2000kv... 2.5D or something close

Metallover · 02.22.2009, 11:06 PM

Or just buy a medusa or actual Neu. Or a lehner. Or a Hacker. Or a Plett....

gixxer · 02.22.2009, 11:40 PM

I am thinking 1.5Y (1900kv) would be nice on 4s. Fast enough but usable power.

02.22.2009, 11:57 PM

I allready own a Neu 1512/2.5d, but it would be so much easier to get more people into 1/8th electric if there was a plug and play combo that was directed toward the racer.

02.23.2009, 01:58 AM

blah we need a 3300 kv castle! and gear it up lol

MTBikerTim · 02.23.2009, 02:04 AM

Yeah I am probably going to just use the 2200kv castle for my buggy. I wouldn't be able to gear the 2650 correctly.

lincpimp · 02.23.2009, 03:44 AM

The windings are all 1y. They are varying the length of the rotor to lower the kv. Smart, if you ask me!

glassdoctor · 02.23.2009, 01:36 PM

????

Why would anyone be against more kv choices?

btw, the 1512 1.5y is just fine on 4s... it's what I run and I keep up ok

Mister-T · 02.23.2009, 01:57 PM

Tekin will have more choice in KV and probably the same performance

@ lincpimp, please read you PM on Rctech; Thanks :)

SpEEdyBL · 02.23.2009, 10:07 PM

This is probably the third time I have said this, but a 1512 1.5Y would be nice. Better hurry up before the 1.5Y tekin motor gets the call, but I would much rather have a motor that matches my 2650 in appearance. The 1518 1Y will not be the same, as it will draw more current than a 1512 1.5Y not to mention that it will be quite a bit bigger and heavier.

glassdoctor · 02.24.2009, 12:45 AM

Tekin is doing all the motors that Castle SHOULD have available

lincpimp · 02.24.2009, 12:48 AM

Quote:

Originally Posted by glassdoctor

Tekin is doing all the motors that Castle SHOULD have available

Are they going to be priced competitively with the cc motors?

gixxer · 02.24.2009, 12:50 AM

Quote:

Originally Posted by glassdoctor

Tekin is doing all the motors that Castle SHOULD have available

since this is a castle thread I wasn't going to say that. I just went ahead and ordered their motor.

04.16.2009, 02:56 PM

Quote:

Originally Posted by glassdoctor

Tekin is doing all the motors that Castle SHOULD have available

Has there been any thought on a lower KV motor?

There is going to be some stiff competition with Tekin and I would like to still run my Castle equipment. There is a great need for a 2650 size can 1900kv motor!