Tekin 2000kv in Aftershock?

[Klausen]

Does any of you have any experience with the Tekin RX8/2000 kv truggy combo in an Aftershock/LST?

So far I have ran the MMM/2200 combo, which I have now sold.

So the question is actually if the RX8 can handle the weight from the Aftershock.

[lincpimp]

On 6s geared lower it should work.

Might want to stick with lighter wheels and tires.

I found a 1521 1y on 6s would allow pretty much any tire choice. And the tekin is 1515 sized.

[Klausen]

So on 4 and 5s it would be better to stick with the MMM combo?

[lincpimp]

I used the MMM/2200 on 5s in a lst and it did fine, but I was running truggy tires on it. How hot does it get in Denmark?

[Klausen]

I used to run the MMM/2200 combo as well, but threw it in my Savage, which I have now sold, so just wondered if the RX8 combos would do any good in it, now that I have to buy a new brushless combo.

In Denmark the temperatures rarely hit the late 80´s, but in the summer normally +/- 70 degrees.

I run the truck on Proline 40 series Moabs.

[Semi Pro]

Originally Posted by Klausen

I used to run the MMM/2200 combo as well, but threw it in my Savage, which I have now sold, so just wondered if the RX8 combos would do any good in it, now that I have to buy a new brushless combo.

In Denmark the temperatures rarely hit the late 80´s, but in the summer normally +/- 70 degrees.

I run the truck on Proline 40 series Moabs.

at thouse temps it should do fine