what should i get?

[rcbeast]

i want to run single steering servo in my bl e-maxx... what servo should i get? i need one around 50$

[E-Revonut]

Goodluck! In all seriousness this topic just came up a few days ago. Don't remember the member but they wanted a good servo for $40. For that price point you pretty much need to take your chances with the HK stuff. To get a good servo brand new the cheapest you'll find is gonna be about $80, you may be able to find a used Hitec 5955TG or 7955TG for about $60. For a single servo in a Maxx or any other MT you should be looking for something with at least 250oz/inch torque. I just got a Savage Flux myself and I'm sticking a Hitec 7955TG in it in the next couple days, 333oz tourque and I think the speed is like .16 or something like that

[rcbeast]

would this work?????

http://www.savoxusa.com/product_p/savsc0251mg.htm

[E-Revonut]

will it work or will it work well? It will work but is less powerful than the combined stock dual servos.

[rcbeast]

is around 26 oz.-in. really that much of a difference?

[E-Revonut]

Do you really want to downgrade and lose 10% of your steering power? The E-Maxx setup is weak with the smaller tires that where on the original E-Maxx, the brushless Maxx has bigger tires so I'm sure it has a harder time throwing those tires from side to side, I sure wouldn't want to give up 10% of what it has to begin with

[rcbeast]

i dont even have servos right now... im woking on a project but thank for your help anyways... anybody runing any thing differend that has a low price?

[coolhandcountry]

I like the hitec servos myself.
They are not cheap though unless get a used one.
Really helps the truck handle better.

[Bondonutz]

With servos like anything else you get what you pay for, I'd save some more money to get a high qaulity Dig MG High Torque jobber like a JR or Hitec. But if your absolute on getting something cheap heres a option.
http://www.hobbypartz.com/radm49gdisew.html
You can alwasy pick up something on Ebay cheap but your guess is as good as mine on what youll actually receive ?

[rcbeast]

thanks guys if i can work up 109$ i found a crazy powerful servo i would probably try... check this beast out http://www.savoxusa.com/product_p/savsv1270tg.htm

[rcbeast]

anybody know a cheaper alternative to this servo that has close to the same specs and is metal gear also?????

[E-Revonut]

http://www3.towerhobbies.com/cgi-bin...1&I=LXPHD6&P=K

[BrianG]

Personally, I've had really good luck with the Ace DS1015 servos: http://www.acehobby.com/ace/digital_srv.htm

They have it listed at ~$120 but you can get them for under 100 pretty much anywhere...