full e-maxx transmission

[Rcbros]

Does anyone know if Mike can make a complete ready to drop in e-maxx transmission?

Or does anyone know where I can get one and how much?

Thanks

[Serum]

Mike can get you one.

with a stock case, FLM case, steel idlers, stock idlers..

i would take the steel idlers for sure..

[Rcbros]

I've sent him both pm and e-mail but no reply.

I will be using the single speed conversion but I have that. So I just need the remaining goodies, the idler and the case.

I need a price so that I can tell my customer.

[Rcbros]

anyone know a price?

[mmdooley]

You can get the aluminum half case from FLM for about $40 bucks. Don't know about the steel idlers I can't find them either but I am running the stock gears in my single speed and they are holding (knock on wood)
Good luck

[Rcbros]

I don't need the FLM case or the single speed conversion. I have them. I just need the bearings and the other gears.

Anyone know what parts these are? maybe I can just buy them myself.

[squeeforever]

http://www.rc-monster.com/proddetail...TRX3994&cat=17

http://www.rc-monster.com/proddetail...TRX3993&cat=17

http://www.rc-monster.com/proddetail...03idler&cat=41 or the below

http://www.rc-monster.com/proddetail...TRX3996&cat=17

http://www.rc-monster.com/proddetail...TRX3985&cat=17

other than this you will need a slipper of your choice, a motor plate, and bearings. i didnt see the bearings in the store but the stock slipper pieces and motor plate are in mikes store.

[Serum]

Hang on rcbros, help is on it's way..

[Sylvester]

You can just pay mike 15$ for the bearings you will need, thats what i did.

[coolhandcountry]

The last time I checked with mike I think it was about 90 for a trans with two speed and metal idlers. Don't hold me to this though.

[Rcbros]

well after studying the exploded views I think I found what I need. Keep in mind i'll be running the single speed conversion:

DuraTrax Bearing 5x11mm (4) $6.00
DuraTrax Bearing 6x12mm (4) $7.00
Traxxas Input Shaft Drive Gear E-Maxx $6.50
Traxxas Shaft Output E-Maxx $7.20
Traxxas Output Gear 31T E-Maxx $3.00
Traxxas Washer Teflon 6x8x5 (10) T-Maxx 2.5 $1.20
Traxxas Carrier/Drive Dog E-Maxx $3.90

[Sylvester]

All correct, but you dont need the carrier/drive dog in a single speed.

[Rcbros]

k thanks!

[Sylvester]

No problem..

[RC-Monster Mike]

try rcmonstermike@gmail.com for emails, william. I did find your pms