electronics/BEC/transponder question

[DwightSchrute]

i have a servo that makes it necessary for me to use a BEC. however, it uses my last AUX port on my receiver and all i have left is the bind port and i still need to be able to plug in my transponder.

my questions are:

1. can i use the bind port for the transponder?

2. if not, can i run a Y harness between the servo and transponder or the bec and transponder?

thanks for the help in advance guys.

[suicideneil]

2) I would favour just using a Y-lead on either the servo or throttle channel, just in case the bind slot is a bit fussy about what is plugged into it.

[DwightSchrute]

thanks!