Brushless LSP Project

Hotbodies LSP Brushless Project

Thats mine soon to be brushless :D

getting:

Rc monsters Brushless motor mounts



Feigao 9XL brushless motor



17tooth mod 1 pinnio



MGM Compro 160amp BL ESC



18cell Elite 4000 Battery





Bring on the summer!!!

any advice that will make this better please help :D

Forget the Ni-Mh batt and go for 6s li-po and go for the 10XL motor instead

cheers but i can afford lipo atm :/ it is on the to-get list though

and will the 10xl still be better on the nimh's ?

its going to be my bash truggy so speed isnt a must but would like it too keep up with the nitro's

With the money you spend on those nimh, you can buy your self some cheap lipo

Originally Posted by Blunten

With the money you spend on those nimh, you can buy your self some cheap lipo

Exact, and if you still going with 18 cell ni-mh, the 9XL will be little too much rpm, the 10XL will give you cooler run and longer runtime.

yea i'm sticking to the 18cell batteries and i'll go for the 10xl cheers for the help!

[jnev]

Looks like a good plan to me. I would only replace the MGM ESC with a Monster Max ESC which will be out in a week or two.

mamba is out as soon as that :O

yea i'll go for that if its out before i have to order

[tom255]

Advice:
Forget NiMh diying technology, Only high tech NiMh's holding voltage under decent load. They will heat up like hell and cost you more than cheapo LiPo and not last long. In save of wight go LiPo in Decent charge time and robust durability go A123.
HC sells 4S 5000 zippy-H cells for $90 and they are pretty good, I dont have too many cycles yet about 10 but seems OK

can you please show me a link to theese li-po batteries?

also would like 4 packs and im on a really tight budget ive only got about $220 for batteries

isit possable to get lipo for that??

Here you go: http://www.hobbycity.com/hobbycity/s...idProduct=6351 be sure to get a charger that charges lipo too. Oh, and you also need a balancer :)

[tom255]

Oh yeah I forgot to mention:
If you buy Feigao/Wanderer motor buy additionaly RC-Monster Heatsink Clamp
This keap mootor cooler for a while and hold motor together. Feigao and Wanderer have tendency fall apart in heavier impacts.

Originally Posted by tom255

Oh yeah I forgot to mention:
If you buy Feigao/Wanderer motor buy additionaly RC-Monster Heatsink Clamp
This keap mootor cooler for a while and hold motor together. Feigao and Wanderer have tendency fall apart in heavier impacts.

cheers will do

and i cant afford lipo this month but i will get them cheers for the link