Compro 160/18 and new Emaxx...

[Nautilus]

I'm looking for settings for the Compro 160/18 for the new E-maxx. I have a low kV Neu motor hooked up as well and stock radio. I know the Neu is 4 pole and have already set the controller for that. I am running 4s lipos. I don't care about having reverse, so I can shut that off if it will help.

Right now I am getting erratic behavior (jerky acceleration). Could somone please provide me their settings so that I can try them out? Thanks.


throttle min:
neutral:
throttle max:
gear ratio:

type of model:
brake/deceleration:
timing:
range of neutral zone:
automatic correction of neutral:
freewheel:
automatic brake in neutral:

[suicideneil]

Jerky acceleration sounds like glitching, or possibly a loose connection between motor & esc somewhere....

[Nautilus]

Yeah, I actually do have what sounds and feels like glitching, where the steering servos make that glitching noise (constant jerky movement) and refuse to move for a few seconds.

I'll try switching radios to see if it helps.