NJ/NY/PA Get together this w/e

[Arct1k]

Hi,

It doesn't look like there is any "racing" this w/e anywhere local - Anyone interested in a bashing racing get together?

I can host something near me 07928 - Just a local park or such close by for a recharge and a BBQ.

Rgds

[brushlessboy16]

theres a pretty good sized BMX course a few minutes from my house (08060)

[Finnster]

I'll see maybe... Unfort all my veh are down and I have plans on the 16th. The shaft on my 12s for the .5 snapped, and I lost the stupid hingeclip retainer in the front for the hyper ST. It runs but the pins back out.

Hopefully I can find it or a LHS has it (doubtful.) Most likely I'm down and out

[brushlessboy16]

Originally Posted by Finnster

I'll see maybe... Unfort all my veh are down and I have plans on the 16th. The shaft on my 12s for the .5 snapped, and I lost the stupid hingeclip retainer in the front for the hyper ST. It runs but the pins back out.

Hopefully I can find it or a LHS has it (doubtful.) Most likely I'm down and out

i have an 8xl and 9xl if you can fit it on the .5

[Finnster]

Originally Posted by brushlessboy16

i have an 8xl and 9xl if you can fit it on the .5

Haha, so do I. that would really be last resort. I have no idea where I'd put the esc. Thanks tho

[Arct1k]

I have a spare 7L and ammo 2600 as my medusa 50 is now installed ;)

[brushlessboy16]

Originally Posted by Finnster

Haha, so do I. that would really be last resort. I have no idea where I'd put the esc. Thanks tho

zipties, duct tape, and creativity can get you a long way

I'm not gonna be able to make it this week end either. To much stuff to do. Also I'm out for the 24th as I should be going up to Englishtown, NJ to drag race my 1:1! I'm pretty excited as this will b e my first time to the track.

Bye

[Arct1k]

Interesting - My car is 100% stock and would only do 5.9-second to 60 mph and a 14.3-second quarter-mile at about 97 mph - Any use bringing along?

[brushlessboy16]

Originally Posted by cemetery gates

I'm not gonna be able to make it this week end either. To much stuff to do. Also I'm out for the 24th as I should be going up to Englishtown, NJ to drag race my 1:1! I'm pretty excited as this will b e my first time to the track.

Bye

go to atco, ten bux says my car wil take it 1.65 60 foot

[brushlessboy16]

me and my dad are racing at atco tommorow, cool and dry air should make for a fast day :D

[Arct1k]

As I said mine is a 100% stock TT 3.2 conv - This is plenty fast enough for me! I also like to go around corners

Well, I have a '05 mustang v6, my mods include:

Appearance:
- Spec-D tuning grill(black, no pony)
- Sequential tail lights
- Fang Chin spoiler (Black)
- Painted the wing to match chin spoiler (Black)
- BSM wide hood stripes (Black)
- Stock 16's painted (Black)

Performance:
- Mac axle back muffler
- CHE Performance k-member brace w/torque limiters
- Hurst short throw shifter

So, not bad for a first car, eh? Next mods should be a cold air intake with a tune from Justin at VMP tuning. Before the tune(stock) it should run between a 15.1-15.3(don't know what it'll run with my mods), but after the tune it should be in the 14.3-14.7 range.

My father has a '99 GT conv. with too much mods to list, so lets say full bolt-ons. It should run 13.0-13.2, he might break in to the high 12's though....


Brushlessboy16,
I think acto is a little far for me. E-town is only a little over an hour from me, as atco is over 2hrs.

Bye

[brushlessboy16]

ah darn. let us know how it goes

[Arct1k]

Hmmm they are racing at Trains and Lanes on Sunday - Tempting!

3825 northwood ave easton pa 18045