I need LIPOS!

[Steve Krug]

Well, after much research, I found out my only route to lipo's (the zippy 4S1P 5000 pack)is out of stock and won't be restocked for awhile.
The truerc lipos don't handle the amp draw that i'd like, and I don't want to waste another $160 on something that will not work(LIke my maxamps lipos...)I can't afford the Polyquest/maxamp $200 lipos. I just need to get this conversion in good running order before I have to go back to school lol.

I do not have much cash, but please let me know what you have!!

The pack has to handle the power of a 1/8 BL conversion
This one: (http://www.rc-monster.com/forum/showthread.php?t=12571)

If you have something used in good shape LMK how much you want...if you have any old lipos that don't quite have the performance that they used to have, and if you don't want them....i'll take em also!!

I need a 4S pack...or two 2S packs..maybe even a 5S or 6S... Let me know how much you want for them.

peace,

steve

PS, i'm out of town this weekend so i will not be able to answer PM's!

[skellyo]

Why not order 2 of the Zippy-R 4150's in 2S and strap them together for 4S?

http://www.hobbycity.com/hobbycity/s...Ah_21-35C_2S1P

[Steve Krug]

The last time I ran 4000Mah they puffed up. Somebody told me they won't provide good enough amp draw and they'll overheat.

[VintageMA]

Steve - you have a PM.

[jhautz]

PMd ya.

[Steve Krug]

PM back to you jhautz

Originally Posted by Steve Krug

The last time I ran 4000Mah they puffed up. Somebody told me they won't provide good enough amp draw and they'll overheat.

are running a low turn motor? I am asking this beacause a low turn motor will demand more amps than a higher turn motor

[Steve Krug]

I was forced to use a feigao 8XL since there were no 9XL's or 10XL's in stock, and I can't afford a neu or anything better..

[Takedown]

Check out my auction I just posted- http://www.rc-monster.com/forum/showthread.php?t=13515

i think that you can take the motor apart and run your shaft in the 9xl i sent you

(take off the clamp and tap the shaft on a block of wood till the rear comes off)



******can anyone respond to this suggestion? i sent him a motor which had a magnet come unglued on the shaft , so i reglued it but it made my esc. run hot, and ended up giving it to steve

can he use the good motor shaft in his 8xl and put it in the 9xl can i sent him?

thanks any help

[SunnyHouTX]

Hey there SK. Let me know if these interest you: http://www.rc-monster.com/forum/showthread.php?t=13553

[gimpygolden]

Are you still looking for lipo's. I have a Maxamps 4s 6000mah that I don't use. Everything I have now is running 5s. Pack has sat a while but probably only cycled 7-8 times. Has Powerpole connector. PM for price