Neu-Castle prototype 1517 1800kv brushless motor, 24/44 gearing, 6s 30C lipo...can't do a full run with it at this gearing, but can still get a good 10 minutes of blistering speed before I need to shut her down. Need to let me nerves calm after that usually anyways. LOL
1. MBX-6 T8 1900KV, RX8 ON 4S
2. MBX-5T 1520, MMM ON 5S
3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S
4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S
5. TEN T 2650 T8, MMP ON 3S
He must have some thick fluid in the diff or no diff at all. The front tires of my 8ight just pizza wheel when I hit full throttle with my 2650 5s setup, even with 10k fluid.
Check out my custom converted 8ight:
Sub 7lb, lowest CG of any 1/8 buggy
My buggy runs 30k and the fronts just balloon as well. I haven't seen a 1/8 buggy wheelie in person, unfortunately.
My 8ight can still do wheelies with 10k fluid, but only from a standstill or very slow speeds, nothing like in the video though! My novak HV4.5 had the easiest time pulling wheelies believe it or not.
Check out my custom converted 8ight:
Sub 7lb, lowest CG of any 1/8 buggy