I bought me some Turnigys!

I finally bought me some Turnigy Lipos, they are 3s 5000mah 35C, i got 4, and they just got listed as shipped! Why am i so happy?, I haven't bought new lipos in at least a year!:pa rty:

[sikeston34m]

Originally Posted by Fast5sRevo88

I finally bought me some Turnigy Lipos, they are 3s 5000mah 35C, i got 4, and they just got listed as shipped! Why am i so happy?, I haven't bought new lipos in at least a year!:pa rty:

Congratulations!

I think you'll be pleased with them.

What do you plan on running them in and what is your setup?

Well, right now i will just run them in my VXL Rusty for now, but i see a 6s Erevo or Flux in my future.

If I still have my Flux, thats what i'll be getting this spring. No more overpriced and touchy SMC's for me

[Slowkrawl]

Originally Posted by Fast5sRevo88

Well, right now i will just run them in my VXL Rusty for now, but i see a 6s Erevo or Flux in my future.

Just make sure you have the same amount of cycles on all the batteries. Running a new battery and an older battery in series is not really a good idea.

[sikeston34m]

Originally Posted by Slowkrawl

Just make sure you have the same amount of cycles on all the batteries. Running a new battery and an older battery in series is not really a good idea.

That's good advice.

I would number them and rotate.

[scarletboa]

Originally Posted by sikeston34m

That's good advice.

I would number them and rotate.

that's what i do with my turnigy hardcase packs

Will do, anyway i recieved them today, only a week and a half after i ordered them. I just realized they have different balance plugs from my Polys, what are they? Align?

[lincpimp]

Yep jst/align plugs. Same pin spacing as the polyquest.

Thanks Pimp!, Could you pass the lady parts?

[BrianG]

Originally Posted by Fast5sRevo88

Thanks Pimp!, Could you pass the lady parts?

I think the only parts he has left "unused" is the voice box...

That's fine, i usually buy used anyway. Well i just ordered the XH adapter for my hyperion charger from MonsterMike, so i will be a few days before i can put a charge on them. Although i can't balance them, should i put a few amps in them, or do they come a little charged to start with? Since these aren't Shitamps i am assuming that these aren't dead on arrival. One time i did order a Trashamps and didn't charge it immediately and it was dead when i tried to charge it.

[ilpufxit]

Originally Posted by BrianG

I think the only parts he has left "unused" is the voice box...

I wouldn't be so sure

[sikeston34m]

Originally Posted by Fast5sRevo88

That's fine, i usually buy used anyway. Well i just ordered the XH adapter for my hyperion charger from MonsterMike, so i will be a few days before i can put a charge on them. Although i can't balance them, should i put a few amps in them, or do they come a little charged to start with? Since these aren't Shitamps i am assuming that these aren't dead on arrival. One time i did order a Trashamps and didn't charge it immediately and it was dead when i tried to charge it.

Have it your way. LOL You can put some amps in if you want, but they usually come with the cell voltage sitting around 3.85 volts per cell. About 50% charged.

[lincpimp]

Originally Posted by Fast5sRevo88

Thanks Pimp!, Could you pass the lady parts?

No prob, here ya go: NSFW

Originally Posted by BrianG

I think the only parts he has left "unused" is the voice box...

Nah, they usually wear that out when I am around (brown chicken brown cow!!)

Originally Posted by ilpufxit

I wouldn't be so sure

Backs of knees never get touched...