 |
|
|
|
|
|
 |
 |
MMP on 6s do I need to change wires? |
 |
|
 |
|
(#1)
|
|
Guest
Posts: n/a
|
MMP on 6s do I need to change wires? -
03.15.2010, 03:14 PM
As the title states im wondering what the min. wire gage I need to run my MMP on 6s with Tekin T8 1400Kv motor in HB Ve8 on 6s 2650 40c lipo. Will I be OK with all the original wiring on the MMP or do I need to go up to a larger gage? I know the MMM uses a much larger gage wire. What do you think?
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
03.15.2010, 03:47 PM
I don't think you have too. You won't be pulling that many amps on 6s with the 1400kv motor.
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
03.15.2010, 04:52 PM
Wire gauge/diameter is a function of current, not voltage: higher current require larger wire. Like snellemin said, if you're running 6s on a low current setup, the existing wires will be fine.
|
  |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Guest
Posts: n/a
|
03.15.2010, 06:25 PM
Ok thats what I thought I just wanted to confirm before I went ahead and ran it. Thanks guys! I'll let you know how it works out.
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
