MMpro & 60mm medusa in a 1/8 Truggy?

I have a 1/8 Mutilator Truggy, MMPro, and a 60mm1300kv medusa. I'm thinking about putting the electronics in the Mutilator and gear for 20mph on 5s or 25mph on 6s. The truck would be for a kid, so it doesn't have to go any faster.

Do you think the esc&motor will work(not overheat) in this setup?

[lincpimp]

Yeah, amp draw should be pretty low. I would also set the punch control way up, like 100%. Should tame the wheelies!!! Or front tire unloading depending on what thickness center diff fluid you use.

Thanks! I believe I have 30000 or 50000 fluid in the center diff.

[el tomaso]

I think thats a nice light setup, I am running MMPro and 60mm medusa 1600kv in my caster buggy now. I think that could truggy...

TG

[scarletboa]

that combo is perfect for what you are wanting to do.