Ofna motor mount - RC-Monster Forums

SlidSlide · **Ofna motor mount -** 07.03.2009, 12:26 PM

Will "Brushless Motor mount - Ofna CR Buggy" also fit into hong nor x1-crt (or x2-crt)? If not, then do you have any motor mount which fits into x1-crt?

Arct1k · 07.03.2009, 12:34 PM

The crt mount http://www.rc-monster.com/proddetail.php?prod=RCMCRT1

riverat1540 · 07.03.2009, 01:47 PM

but if u plan on running a smaller spur besides the ferris wheel thats on there use the cr mount and do a ring and pinion conversion. u wont regret it way more chassis space to balance things out

SlidSlide · 07.03.2009, 03:26 PM

Quote:

Originally Posted by riverat1540

but if u plan on running a smaller spur besides the ferris wheel thats on there use the cr mount and do a ring and pinion conversion. u wont regret it way more chassis space to balance things out

Thanks for the tip.

07.24.2009, 06:20 AM

another thing will the crt mount fit the cr buggy?

Superbasher · 03.03.2010, 05:39 PM

Sorry to bump up an old post but it seems relevant, as I'm wondering the same thing as the post above. If that doesn't fit, is the CR mount the correct one? As I just got a Jammin version X1 CR pro for cheap from ebay and I'm looking at bringing it over to the light side.
Cheers,
Matt

Arct1k · 03.03.2010, 06:06 PM

Buy a CR mount for a CR

01.06.2011, 04:06 AM

Hey guys, first post here and I got a question about the motor mount that the OP linked to. I plan on using that in an Ofna Blazer SST which uses the 9.5 violator chassis so this mount is what I need. I was curious if there were certain motors that could or couldnt be used with this mount. I plan on using something along the lines of a Mamba Monster 2200 or 2650kv motor, will something like that work alright with this mount?